|
LP1090 XX-GG-290 |
|
 |
Las Vegas, Nevada – Magtech Industries Corporation announces the introduction of its exclusive new Wet-Label 96 Watt LED Driver, a new addition to it’s very popular LP1090 series of LED Drivers. With the addition of a NEW Universal Input of 100 through 277VAC, this now provides an ideal LED Driver for the total LED Lighting Industry for signage and luminaire applications.
|
|
|
LP12060 Series |
|
 |
UL1310 and UL48, Class 2 recognized
Single output, available in 8, 9, 10, 12 and 24VDC
Certified with IP54 environment requirements
Suitable for wet or dry locations
Designed for outdoor or indoor applications
Compact, lightweight w/ aluminum extruded case
Active Power Factor to reduce power consumption
|
|
|
LP4100 Series |
|
 |
100W Quad-Single DC Output (Class 2)
UL1310, Class 2 safety recognized
4 Channel Single output with C.V or C.C mode
In compliance w/ IP66 environment requirements
Design for damp or dry locations
Aluminum case w/ convection cool
> .90 Power Factor to reduce power consumption
|
|
|
16-Watts, AC Line Dimming Solution |
|
 |
This series only come with constant current output and is available either with 110VAC or 220VAC input. The dimming feature can be controlled by cycling AC on/off switch or controlled by Low Voltage Electronics Dimmer (Trailing Edge). The series is UL Class 2 recongnized for general LED applications.
|
|
|
LP1240-xx |
|
 |
240W Single Output (non-Class 2)
UL1012 recognized
Single channel 240W with C.V mode
In compliance w/ IP64 environment requirements
Design for dry, damp or wet locations
Designed for outdoor and indoor applications
Aluminum extruded case w/ convection cool
> .90 Power Factor to reduce power consumption
|
|
|
LF1048, C/C mode |
|
 |
48-53W LED driver, Constant Current Mode - UL1310 Class 2 (under 48V) or UL1012 recognized (Pending)
- Single output with C.C. or C.V mode
- Certified with IP65 environment requirement
- Suitable for damp or dry locations
- Designed for outdoor or indoor applications
- >.92 Power Factor to reduce power consumption
|
|
|
16-Watts, AC Line Dimming Solution |
|
 |
This series only come with constant current output and is available either with 110VAC or 220VAC input. It is 100% compatible with the off-the-shelf Triac (leading-edge) dimmer. This series complies to UL1310, Class 2 safety standards.
|
|
|
24-Watts, AC Line Diming Solution |
|
 |
This series only come with constant current output and is available either with 110VAC or 220VAC input. It is 100% compatible with the off-the-shelf Triac (leading-edge) dimmer. This series complies to UL1310, Class 2 safety standards.
|
|
